Due to the Easter holiday, rush gobo production will not be available on Monday, 4/21.
1-800-213-1092
Frequently Asked Questions
Deals & Discounts

Projector Setup and Maintenance

This is a sample procedure for preparing your ECO Spot Projector for projection. It is a similar procedure to other brands of gobo projectors; however, every brand of gobo projector is different. Please refer to your brands user manual and specifications if using a gobo projector other than an ECO Spot Projector.

Projector Install Guides

Quick start guides for instructions on unpacking, configuring and hanging projectors. Includes diagrams of suggested and typical mounting techniques.

ECO Spot Install Guide


Download ECO Spot Install Guide

ECO Lines Install Guide


Download ECO Lines Install Guide

Projector Set Up

Always prepare the projector and follow all safety warnings by following the user manual and spec sheet that comes with the projector.

What's Needed:

  • ECO Spot LED Gobo Projector-Correct Size Gobo, please see gobo sizes on projector listings (E, D, M)



  • Retaining Clip (usually pre-installed in the projector’s gobo holder)



  • E to D size adapter ring if using an E-size gobo in a D-size gobo holder



  • Interchangeable ECO Spot Adjustable Mount, Tripod Stand, Tripod Adapter


    • To Put Projector on a Stand or Tripod You Will Need:

    Interchangeable ECO Spot Adjustable Yoke/Mount, Tripod Stand, ECO Spot Adapter


  • A tripod stand

  • Adapter Small/Large Setup

  • A tripod adapter that goes between the stand and yoke(please see our projector stands and mounts category for GoboSource options)



  • Large Setup Example


    		•

    Basic Preparation Steps:

    1. Insert the gobo with the mirrored side facing the LED lamp by reversing the image when placing the gobo in the gobo holder. If the gobo is metal, insert the gobo reversed to project with the correct orientation, please follow the user manual



    2. Make sure your projector is as perpendicular to the projection surface as possible to prevent keystone distortion of your projection.



    3. Use your lens to focus your projection by loosening or tightening the lens until the projection is in focus, your focal point will depend on your gobo, your projector, your distance to your projection surface, and your lens choice.



    4. Once you have the gobo focused you may use the rotator to rotate your projection to the desired orientation or leave it on for a clockwise rotation of your projection.



    5. Your gobo projector and gobo are ready for use.

    Resources:

    Click this LINK to see the setup VIDEO

    Gobo changing and focusing instructions

    Lens kit assembly instructions

    Basic cleaning instructions for SMALL ECO Spot INTERIOR

    Basic cleaning instructions for BIG ECO Spot INTERIOR

    Basic cleaning instructions for ECO Spot EXTERIOR

    LED Replacement Manual B40-C40

    Visit our BLOG for more details about how to clean and service your Gobo projector.